KingPo Technology Development Limited develops testing equipment and laboratory solutions for safety, performance and compliance verification based on IEC, ISO, EN, UL and related standards. Its portfolio covers medical device testing, electrical safety, ingress protection, flammability, environmental reliability, batteries, cables and automotive components, combining dedicated instruments, precision fixtures, gauges and configurable laboratory test systems.
Company Origins: 2000 • Primary Focus: Standards-based laboratory testing equipment • Typical Users: Testing laboratories, manufacturers, R&D and QA teams
Selecting laboratory testing equipment is rarely a matter of choosing the instrument with the highest voltage, largest chamber or longest specification list. Laboratories first need to identify the applicable standard, test clause, test object, required circuit or fixture, measurement range and acceptance method.
This is particularly important in standards-based testing, where equipment that appears similar may serve completely different purposes. A defibrillation-proof tester is not a defibrillator analyzer. A neutral-electrode contact impedance tester is not the same instrument as a neutral-electrode temperature-rise tester. An IEC 62368-1 impulse generator must also be selected according to the required circuit and waveform rather than maximum voltage alone.
KingPo Technology Development Limited focuses on this type of standards-based laboratory equipment and supports manufacturers, R&D teams, quality departments and testing laboratories with standard instruments, dedicated test fixtures and project-specific configurations.
Engineering principle: The correct test system should be selected from the applicable standard, test clause and test object—not from the equipment name alone.
Who Is KingPo Technology Development Limited?
KingPo Technology Development Limited is a testing equipment manufacturer established in 2000. The company develops laboratory instruments, precision gauges, test probes, environmental systems, electrical and mechanical test fixtures, measurement equipment and customized test systems for product safety and performance verification.
Rather than concentrating on one single test discipline, KingPo works across several laboratory testing fields. These include medical electrical equipment, medical connectors, electrical product safety, ingress protection, flammability, environmental reliability, batteries, cables, automotive components and other standards-based applications.
The equipment is developed to support testing according to applicable IEC, ISO, EN, UL and related requirements. The correct equipment configuration ultimately depends on the product under test, applicable standard edition, test clause and laboratory procedure.
For more information about the company, manufacturing capabilities and development history, see About KingPo Technology Development Limited.
What Testing Equipment Does KingPo Provide?
KingPo’s product portfolio combines general laboratory systems with highly specialized equipment developed around individual standards, figures, clauses or test methods. The following table summarizes several major testing areas.
| Testing Area | Representative Standards | Typical KingPo Solutions |
|---|---|---|
| Medical Device Testing | IEC 60601 series, ISO 80369 and related medical standards | Medical Test Equipment for ESU testing, defibrillation-related tests, ECG electrodes, neutral electrodes and medical connector verification |
| Ingress Protection | IEC 60529, ISO 20653 | IP Testing Equipment including access probes, dust chambers, drip, spray, water-jet, immersion and high-pressure water systems |
| Electrical Product Safety | IEC 60335, IEC 62368-1 and related standards | Test probes, mechanical fixtures, leakage-current equipment, dielectric test systems and dedicated safety test apparatus |
| Flammability and Fire Hazard Testing | IEC 60695 series and related methods | Glow-wire, needle-flame and flammability equipment |
| Environmental Reliability | IEC 60068 series and product-specific environmental methods | Temperature, humidity, thermal-shock and environmental exposure systems |
| Battery Testing | IEC, UL, UN and product-specific requirements | Electrical, mechanical, environmental and safety-related battery test systems |
| Automotive Component Testing | ISO 16750, ISO 20653 and related methods | Water splash, environmental, mechanical and enclosure protection test equipment |
The complete product structure can be reviewed in the KingPo Testing Equipment product directory. For standards-specific projects, the test requirement should be confirmed before equipment selection.
Representative KingPo Testing Solutions
A broad product catalogue alone does not establish laboratory capability. A more useful way to understand KingPo’s work is to look at representative instruments and the specific test functions they are designed to support.
| KingPo Solution | Primary Test Function | Representative Standard |
|---|---|---|
| KP-8850 ESU Analyzer | Electrosurgical generator output and HF testing | IEC 60601-2-2 |
| KP-HF50 | Neutral electrode HF contact impedance and capacitance | IEC 60601-2-2 |
| KP3301 | Defibrillation-proof and energy-reduction testing | IEC 60601-1 |
| ISO 80369-7 Luer Gauge Set | Medical small-bore connector verification | ISO 80369-7 |
| IP Test Systems | Dust and water ingress testing | IEC 60529 / ISO 20653 |
| Glow Wire Tester | Fire-hazard testing | IEC 60695-2-10 |
| Impulse Test Generator | Impulse voltage testing | IEC 62368-1 |
KP-8850 Electrosurgical Unit Analyzer
The KP-8850 ESU Analyzer is designed for high-frequency electrosurgical generator testing associated with IEC 60601-2-2 applications. Its functions include ESU output-power measurement, load-curve evaluation, high-frequency leakage-current measurement, voltage and current measurement, waveform observation and REM/CQM-related generator-side verification.
This type of application illustrates why equipment selection must begin with the actual test object. The KP-8850 evaluates an electrosurgical generator; it does not replace equipment dedicated to evaluating the electrical or thermal characteristics of the neutral electrode itself.
KP-HF50 Neutral Electrode Contact Impedance Tester
The KP-HF50 Neutral Electrode Contact Impedance Tester is dedicated to high-frequency contact impedance and contact-capacitance evaluation of neutral electrodes. It supports the test method associated with IEC 60601-2-2 Clause 201.15.101.6 and provides test frequencies including 200 kHz, 500 kHz, 1 MHz, 2 MHz and 5 MHz.
This is a focused accessory-testing application rather than a general ESU measurement function. Separating these test purposes is important when a laboratory is planning a complete IEC 60601-2-2 capability.
KP3301 Defibrillation-Proof and Energy Reduction Tester
The KP3301 Defibrillation-Proof and Energy Reduction Tester is intended for selected defibrillation-related evaluations of compatible patient-connected medical electrical equipment such as electrocardiographs, ECG monitors and multifunction patient monitors.
The equipment generates controlled electrical test conditions for protection-against-defibrillation and energy-reduction related testing. It should not be confused with a clinical defibrillator analyzer, whose purpose is to measure the output energy and waveform produced by an actual defibrillator or AED.
ISO 80369-7 Luer Gauge Set and Reference Connectors
For medical small-bore connector verification, KingPo supplies the ISO 80369-7 Luer Gauge Set and Reference Connectors . The range includes Figure C.1 through Figure C.6 reference connectors together with dimensional gauges that can be supplied individually or as a set according to the connector type and test scope.
Reference connectors and dimensional gauges represent another type of laboratory equipment where test purpose is more important than general instrument specifications. Different male, female, slip and lock connector configurations require the appropriate reference component for the required verification.
For a broader overview of the standard family, equipment selection and medical small-bore connector testing, see the ISO 80369 Testing Equipment technical hub.
IEC 60529 and ISO 20653 IP Testing Equipment
KingPo’s IP Testing Equipment covers a broad range of ingress-protection methods, including solid-object and access probes, IP5X/IP6X dust testing, dripping water, oscillating-tube spray, handheld spray, IPX5/IPX6 water jets, immersion and high-pressure water-spray applications.
These methods require different apparatus because flow rate, nozzle geometry, water pressure, exposure pattern, specimen position and test duration change according to the required IP level and applicable standard.
IEC 60695 Glow-Wire Testing
The IEC 60695-2-10 Glow Wire Tester is designed for glow-wire fire-hazard testing of electrical and electronic materials or components. The test arrangement controls factors such as glow-wire temperature, specimen contact force, penetration and timing.
Glow-wire testing also demonstrates why laboratories should distinguish between related fire-test methods. Glow-wire, needle-flame and other test-flame procedures have different test objects, apparatus and evaluation methods.
IEC 62368-1 Impulse Test Generator
The KP-1950S IEC 62368-1 Table D.1 Impulse Test Generator is designed for Table D.1 related impulse voltage testing of AV/ICT equipment. It supports 10/700 μs and 1.2/50 μs pulse waveforms for the corresponding test configurations.
For broader standard context and related test equipment, laboratories can also review the IEC 62368-1 Test Equipment page.
For impulse testing, maximum voltage is not sufficient for model selection. The applicable circuit, waveform, voltage level, polarity, source impedance and DUT connection method must be confirmed before the test generator is specified.
From Standard Requirement to Laboratory Configuration
Many laboratory projects begin with a short purchasing description such as “IEC 60601 tester,” “IP chamber,” “Luer gauge” or “impulse generator.” These descriptions are often not sufficient to define the correct system.
A practical equipment-selection process normally considers the following information before the final configuration is confirmed:
- Identify the applicable standard and edition.
- Confirm the exact clause, figure, annex or test method.
- Define the equipment or component under test.
- Confirm electrical, mechanical, environmental or dimensional test conditions.
- Determine the required measurement range, fixture, connection method and accessories.
- Review specimen dimensions, operating state and laboratory utility requirements where applicable.
- Confirm documentation, calibration and data-recording requirements.
- Finalize the equipment configuration before manufacture and delivery.
For standard products, an existing KingPo instrument or fixture may already match the application. Where specimen geometry, interfaces, automation requirements or laboratory procedures differ from a standard configuration, additional fixtures or customized systems may be required.
Practical takeaway: A standards reference is the starting point for equipment selection—not the complete technical specification.
Testing Equipment for Medical Electrical Safety Laboratories
Medical-device testing is one area where equipment boundaries require particular attention. The IEC 60601 family contains general and particular requirements, while other standards may apply to medical connectors, electrodes, accessories or active implantable devices.
KingPo’s Medical Test Equipment range includes solutions for medical electrical safety, electrosurgical equipment, defibrillation-related testing, ECG electrodes, neutral electrodes and medical connectors.
Laboratories establishing broader medical electrical safety capability can also review the IEC 60601-1 Test Equipment List for a clause-oriented overview of instruments and fixtures used in general medical electrical safety testing.
For high-frequency surgical equipment, the IEC 60601-2-2 Electrosurgical Test Equipment page explains the distinction between ESU generator testing, neutral-electrode contact impedance and neutral-electrode thermal-performance evaluation.
Representative Laboratory Applications
Technical delivery cases provide more useful evidence than generic claims about product quality because they show the relationship between the customer requirement, applicable test method, supplied equipment and laboratory configuration.
TECHNICAL DELIVERY CASE
Defibrillation Test System Delivered to DEKRA Guangzhou Laboratory
KingPo delivered a KP-DFT201 Defibrillation Effect and Energy Tester to DEKRA Guangzhou Laboratory for medical electrical safety testing involving patient-connected medical electrical equipment.
The laboratory configuration combines the tester with an external oscilloscope so that the applied waveform and selected measurement channels can be independently observed. The project demonstrates the importance of reviewing the complete test circuit, connection method, waveform, polarity, measurement path and post-test evaluation rather than treating the high-voltage source as the complete test system.
LABORATORY PROJECT
IP and IK Laboratory Package for URS Products & Testing in India
A separate KingPo project for URS Products & Testing Pvt. Ltd. in India involved a coordinated IP and IK laboratory package covering access probes, solid-object protection, IP5X/IP6X dust exposure, multiple IEC 60529 water-test methods, mechanical impact testing and project-specific automotive rain testing.
Rather than attempting to perform every ingress and impact test in one universal machine, the laboratory package uses dedicated apparatus for the individual methods. This allows the appropriate probe geometry, water flow, pressure, exposure pattern, impact mechanism and specimen arrangement to be selected for each test.
Why Laboratories Consider KingPo Testing Equipment
Standards-Based Equipment Selection
Many KingPo products are developed around a specific test method, clause, figure, circuit or equipment category. This helps laboratories move from a broad standards requirement to a more clearly defined test configuration.
Dedicated Fixtures, Gauges and Reference Components
Compliance testing often requires more than general laboratory instrumentation. Standardized probes, gauges, reference connectors, mechanical fixtures, loads, electrodes and test networks can be essential parts of the measurement arrangement.
Multiple Testing Disciplines
KingPo’s portfolio spans medical, electrical safety, ingress protection, flammability, environmental, battery, cable and automotive testing. This is particularly relevant when a laboratory is building capability across several related product-safety disciplines rather than purchasing a single instrument.
Standard and Project-Specific Configurations
Some tests can be addressed using a standard product configuration. Others require changes to fixture dimensions, specimen mounting, chamber size, electrical interface, automation, software or accessory configuration. The required modification should be reviewed against the test method before the system is finalized.
Technical Documentation and Test-Method Context
Product specifications are most useful when they are connected to the test object and method. KingPo therefore maintains product pages, standards pages, technical guides and delivery cases covering the practical use and selection boundaries of different testing systems.
Testing Equipment Does Not Replace Compliance Evaluation
A testing instrument is only one component of a complete conformity-assessment or laboratory verification process.
The applicable standard edition, product classification, test setup, specimen condition, measurement method, laboratory procedure, measurement uncertainty where applicable, and acceptance criteria must be determined for the device under evaluation.
KingPo equipment is designed to support defined laboratory test requirements. The use of an instrument or test system alone does not constitute product certification and does not guarantee that a device complies with a particular standard.
How to Select the Right KingPo Testing Equipment
When requesting a technical recommendation, providing only the name of a standard may not be sufficient. For faster equipment confirmation, laboratories and manufacturers should provide as much of the following information as possible:
- Applicable IEC, ISO, EN, UL or national standard
- Standard edition or year
- Relevant clause, figure, annex or test method
- Product or specimen under test
- Required voltage, current, frequency, force, pressure, temperature or other test range
- Specimen dimensions, mass and mounting method where applicable
- Required test fixtures, reference components or accessories
- Manual or automated operation requirements
- Data acquisition, software or reporting requirements
- Calibration and documentation requirements
This information helps distinguish between visually similar equipment and reduces the risk of selecting a system that does not match the actual test method.
Frequently Asked Questions About KingPo Testing Equipment
What is KingPo Technology Development Limited?
KingPo Technology Development Limited is a manufacturer of testing equipment, laboratory instruments, gauges, fixtures and configurable test systems. Established in 2000, the company develops equipment for safety, performance and reliability testing associated with IEC, ISO, EN, UL and related standards across medical, electrical, environmental and industrial applications.
What types of testing equipment does KingPo manufacture?
KingPo’s product range includes medical test equipment, IP dust and water test systems, environmental chambers, electrical safety equipment, flame and flammability testers, battery testing systems, cable testing equipment, test probes, gauges, mechanical fixtures and specialized standards-based test systems.
Which IEC and ISO standards does KingPo testing equipment support?
Different KingPo products support different test methods. Representative areas include IEC 60601 medical electrical safety, IEC 60529 ingress protection, IEC 60695 flammability, IEC 62368-1 AV/ICT safety, ISO 80369 medical small-bore connectors, ISO 20653 vehicle ingress protection and other product-specific IEC and ISO requirements. The applicable standard and test clause should be confirmed for each product.
Does KingPo provide medical device testing equipment?
Yes. KingPo provides equipment for several medical-device testing applications, including IEC 60601 electrical safety, electrosurgical equipment, defibrillation-related testing, ECG and neutral electrodes, and ISO 80369 medical small-bore connectors. Different medical standards and test objects require different instruments, so the specific test requirement should be confirmed before equipment selection.
Can KingPo provide customized laboratory testing systems?
KingPo can review project-specific equipment configurations where a standard product does not fully match the specimen size, mechanical interface, electrical connection, automation requirement or laboratory workflow. The proposed configuration should be based on the applicable test method and a clearly defined technical requirement before production.
What information should I provide when requesting a KingPo test system?
Provide the applicable standard and edition, relevant clause or figure, product under test, required test range, specimen dimensions, fixture or interface requirements and any laboratory URS or technical specification available. This allows the equipment configuration to be reviewed against the actual test requirement rather than selected only by product name.
Discuss Your Laboratory Testing Requirement with KingPo
When planning a new test capability, send KingPo the applicable standard, clause, equipment under test, required test conditions and any available laboratory specification or URS.
The technical requirement can then be reviewed to determine whether an existing instrument, dedicated fixture, reference component or customized test configuration is appropriate for the project.
