ISO 16750-4 Figure 4 IP Testing Equipment Stainless Steel Test Set Up For Splash Water Test Jet
MOQ: 1
Price: To be quoted
Standard Packaging: safety carton pack or plywood box
Delivery Period: 7 working days
Payment Method: T/T
Supply Capacity: 200 pcs per month
Product Description
ISO 16750-4 Figure 4 Stainless Steel Test Set – Up For Splash Water Test Jet
5.4.2 Splash water test
5.4.2.1 Test method
Heat the DUT in a hot air oven atย Tmaxย for the specified holding time,th. Then splash the DUT with ice water for 3 s. If the DUT is splashed in the vehicle from only one direction, splash it from this direction only while it is in an as-installed position. If the equipment is splashed from various directions in the vehicle, then these directions shall be taken into account. In this case, use a new DUT for each splash direction. The width of the splash directed at the DUT shall always be greater than the width of the DUT. If the DUTs to be splashed prove too big for one jet, arrange several jets in a row to produce a line of splash impact on the DUT. See Figures 4 to 6.
Detail Information
| Place of Origin | China | Brand Name | Kingpo |
| Certification | iso9001 ce | Model Number | ISO 16750-4-figure4 |
| Number Of Cycles: | 100 | Holding Time,th, At Tmax: | 1 H Or Until DUT Temperature Stabilization Is Reached |
| Transition Duration: | <20 S | Test Fluid: | De-ionized Water |
| Water Temperature: | 0 ยฐC To +4 ยฐC | Water Flow: | Between 3 L And 4 L Per 3 S (splash Duration) |
| Highlight: | rain test equipment, salt spray test chamber | ||
Get Free Quote of ISO 16750-4 Figure 4 IP Testing Equipment Stainless Steel Test Set Up For Splash Water Test Jet
Test Parameters Include
โฏnumber of cycles: 100;
โฏholding time,th, atย Tmax:ย 1 h or until DUT temperature stabilization is reached;
โฏtransition duration:<20 s (for manual transition of DUT between temperature storage and splashing);
โฏtest fluid: de-ionized water;
โฏwater temperature: 0 ยฐC to +4 ยฐC;
โฏwater flow: between 3 l and 4 l per 3 s (splash duration);
โฏdistance between jet and DUT surface: (325ยฑ25) mm (water shall be applied over the complete width of the DUT);
โฏoperating modes: see Figure 5;
โฏorientation of the DUT: as in the vehicle.
Detail Display - ISO 16750-4 Figure 4 IP Testing Equipment Stainless Steel Test Set Up For Splash Water Test Jet
Related Products
Related News
IPX9K represents one of the highest levels of water ingress protection in the IEC 60529 and ISO 20653 standards. It […]
Quick FAQ What is a Dust Chamber used for? A Dust Test Chamber is used to simulate controlled dusty environments […]
