ISO 80369-7 Figure C.3 Female Reference Connector

ISO 80369-7 Figure C.3 Female Reference Connector

The ISO 80369-7 Figure C.3 Female Reference Connector is used as a controlled mating component when evaluating male Luer lock connectors. It should not be confused with the ISO 80369-7 Figure C.1 Female Reference Luer Lock Connector, Figure C.5 Female Reference Luer Slip Connector, or the ISO 80369-7 Female Ring Gauge.

In a typical test setup, the male Luer lock connector sample is mated with the Figure C.3 female reference connector. The assembled connection is then used in the applicable ISO 80369 test procedure according to the required evaluation item and sample structure.

This page is intended for customers who specifically require Figure C.3 for a male Luer lock connector test configuration. Customers who need multiple ISO 80369-7 reference connectors should consider the complete ISO 80369-7 Luer Gauge Set.

Key Drawing Notes and Use Limitation

Figure C.3 has its own geometry and use limitation, so it should not be treated as interchangeable with C.1, C.5 or a female ring gauge. The official Figure C.3 drawing notes include a double-start right-hand thread and a specific limitation for certain non-interconnectable characteristic evaluations.

The Figure C.3 reference connector should be selected according to the required figure number and the test method. If the test item involves a specific collar outside diameter or non-interconnectable characteristic evaluation, the correct reference configuration should be confirmed before testing.

How It Is Used and What It Tests

Typical Use Procedure

1. Confirm that the sample is a male Luer lock connector and that ISO 80369-7 Figure C.3 is the required reference connector.
2. Mate the male Luer lock sample with the Figure C.3 female reference connector.
3. Install the assembled connection into the applicable ISO 80369 test setup.
4. Apply the required test condition according to the selected procedure.
5. Record the result and inspect the connection according to the applicable test requirement.
6. After testing, clean and protect the reference connector to avoid scratches, contamination or thread damage.

Typical Test Applications

The Figure C.3 connector is mainly used in ISO 80369-7 test configurations where a female reference connector is required for evaluating male Luer lock connectors. Typical applications may include:

• Male Luer lock connector mating evaluation
• Separation from unscrewing related test configurations
• Resistance to overriding evaluation where applicable
• Stress cracking related connector evaluation where the selected procedure requires Figure C.3
• Non-interconnectable characteristic evaluation only when the test configuration allows this reference connector
• Laboratory confirmation of male Luer lock connector fit and engagement

The exact test item should be confirmed according to the applicable ISO 80369-7 clause and ISO 80369-20 test method. The Figure C.3 connector itself is a reference connector, not a complete test apparatus.

Technical Features

• Designed according to ISO 80369-7 Figure C.3 reference connector geometry
• Female reference connector for male Luer lock connector testing
• Threaded reference interface for Luer lock connector evaluation
• Double-start, right-hand thread configuration according to the Figure C.3 drawing note
• Precision-machined mating surface for repeatable connector engagement
• Hardened steel or stainless steel configuration can be supplied according to the product specification.
• Material information, dimensional confirmation or hardness confirmation can be provided where applicable.
• Available individually or as part of the complete ISO 80369-7 Luer Gauge Set
• Suitable for R&D validation, laboratory testing and factory quality control
• Can be used with suitable ISO 80369-20 test equipment when performance testing is required

Operation and Handling Notes

The Figure C.3 connector should be handled as a precision reference component.

• Confirm the required figure number before testing.
• Do not replace Figure C.3 with Figure C.1, Figure C.5 or a female ring gauge unless the selected procedure clearly allows it.
• Confirm whether the tested sample is a male Luer lock connector.
• Check that the thread engagement is clean and free from visible damage.
• Do not force the connector onto an incompatible or damaged sample.
• Avoid impact, corrosion or contamination during storage and use.
• Store the connector in a protective case after testing.
• Confirm documentation requirements before order placement if the connector will be used in a regulated laboratory environment.